Recently, SAIC Roewe interpreted the power configuration and relevant parameters of the new erx5 on the official platform. This model just made its debut at the 2022 Guangdong Hong Kong Macao Grand Bay auto show, which opened on May 28 It is reported that the plug-in hybrid system of the new Roewe erx5 is equipped with a 1.5T engine with a maximum power of 138kw and a peak torque of 300nm. It is matched with a high-performance permanent magnet synchronous motor with a maximum power of 180kW and a peak torque of 270nm. It uses the I-pin flat wire winding technology, and the maximum efficiency can reach 97%. Such a hybrid combination makes it only 6.9s for the new car to accelerate up to 100 kilometers.
At the same time, in terms of transmission, the new Roewe erx5 is equipped with a 2x5 10 gear transmission. The motor gear and engine gear can be freely matched. At the same time, it has adaptive shift technology, which can adapt to different driving habits, so that the vehicle can maintain smooth and sensitive response in acceleration, deceleration and other scenarios.
In terms of battery safety, the new car is equipped with battery zero combustion technology, which exceeds the requirements of the new national standard. At the same time, it also has a full-time monitoring water cooling system and an integrated battery tray structure, which makes the battery safer and has a longer service life.
In the electric control part, the new Roewe erx5 is installed with an IEM intelligent energy management system, which can adjust the intelligent power system and manage the intelligent power, so that the plug-in hybrid power has a comprehensive endurance of 1050km under NEDC working conditions, and the fuel consumption of 0.5-1L per 100 km is optimized.
Simply review the appearance design of the new Roewe erx5. The most eye-catching feature of this new car is its front face design. The open front grille trim panel not only forms a spindle gradually converging to the center, but also the texture in the trim panel is like dragon scales or wings, which looks very sharp.
On the side of the car body, the new Roewe erx5 does not continue the "straight" design style of the current version on sale. Instead, the roof has a slight sliding back. At the same time, the bottom edge of the rear triangle window is slightly upturned, and the included angle between the D pillar and the waist line is smaller, thus forming a more sporty posture. At the same time, fold lines and metal trim strips are added to the underbody, which together with the "double eyelid" wheel eyebrows make the new car more fashionable.
The rear details of the new Roewe erx5 are quite rich, which makes it have a strong sense of hierarchy from the back and more refined. In addition, the new car is equipped with a through tail light belt, a protruding small platform below, and a guide kit on the roof. This design gives the rear of the car a bit of mecha style. I believe young people will be more useful.